Specifications

USB Port:

Hi-Speed USB *

Network Port:

Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b

* A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

USB and the network can be used at the same time.

Temperature: 41 to 95 °F (5 to 35 °C)

Humidity: 10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature and humidity conditions.

Recommended conditions:

Temperature: 59 to 86 °F (15 to 30 °C)

Humidity: 10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.

Temperature: 32 to 104 °F (0 to 40 °C)

Humidity: 5 to 95 % RH (no condensation)

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Printing (Copy): 9 W or less *1

Standby (minimum): 1.0 W or less *1*2

OFF: 0.4 W or less

*1 USB connection to a PC

*2 The wait time for standby cannot be changed.

Approx. 17.2 x 12.9 x 5.8 in. (Approx. 435 x 327 x 145 mm)

* With the trays retracted.

Approx. 8.7 lb (Approx. 4.0 kg)

* With the FINE Cartridges installed.

Windows: TWAIN 1.9 Specification, WIA

600 x 1200 dpi *

* Optical Resolution represents the maximum sampling rate based on ISO 14473.

Gray: 16 bit/8 bit

Color: RGB each 16 bit/8 bit

Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b

Frequency bandwidth: 2.4 GHz

Channel: 1-11 or 1-13

* Frequency bandwidth and available channels differ depending on country or region.

Communication distance: Indoors 164 feet/50 m

* Effective range varies depending on the installation environment and location.

Security:

WEP (64/128 bits)

WPA-PSK (TKIP/AES)

WPA2-PSK (TKIP/AES)

Setup:

WPS (Push button configuration/PIN code method)

Easy wireless connect